Hampstead Aerials & Satellites

Receivers & recorders

Sky, Freesat and Freeview equipment set-up

We're independent engineers, not a subscription reseller. That means we can do the parts the provider's installer won't: move the dish to a better position, cable extra rooms neatly, replace failed LNBs and multiswitches, and set your boxes up so everything actually records.

  • Independent of any provider
  • Multi-room cabling
  • Relocations and re-cables
Modern black satellite minidish neatly installed on a London brick wall for Sky and Freesat

North & North West London

The work the provider's standard install skips

Standard installs are designed to be quick. Cable gets clipped across the front of the house, the dish goes wherever is fastest to reach, and anything awkward gets declined. We come at it from the other direction: choose the discreet mounting point, hide the cable, and take the time to peak the alignment.

We also handle the jobs that come up years later. Moving a dish because of an extension or a new neighbouring building. Re-cabling to feed a second receiver or a recorder with two tuners. Replacing a corroded quad LNB. Swapping a failed multiswitch in a block. Setting up a box after a house move so the recordings and the tuning are right.

If you want to leave a subscription behind, Freesat and Freeview give you a large amount of television for nothing beyond the licence. We'll tell you honestly what you would keep and what you would lose, and set up whichever route you choose.

What the job includes

What we do with satellite and Freeview equipment

Dish relocations

Moving a dish for an extension, a loft conversion, scaffolding or simply to get it off the front elevation.

Multi-room feeds

Extra cable runs and the right LNB or multiswitch so second receivers and recorders both work.

Recorder set-up

Twin-tuner boxes cabled and configured so series recording doesn't fight live viewing.

Freesat installs

Subscription-free satellite set up on a new or existing dish, tuned and demonstrated.

Freeview boxes

Aerial-fed receivers and recorders installed, tuned and checked across every multiplex.

House-move set-ups

Getting existing equipment working at a new address, including tuning to the local transmitter.

How it works

Sky & Freesat set-up: from your first message to a finished job

  1. 01

    Tell us the kit

    Which boxes you have or want, and how many rooms need a live feed.

  2. 02

    Check the feed

    We confirm the dish or aerial can support the number of tuners before we commit.

  3. 03

    Cable and connect

    Runs installed neatly, plates fitted, equipment connected and powered.

  4. 04

    Tune and show you

    Everything tuned, recording tested, and the remote handed back working.

Questions we get asked

Sky & Freesat set-up — the details

Are you connected to Sky?

No — we're an independent local firm. We install, repair and re-cable the dish and aerial side of things, but any subscription or account matter goes through the provider.

Can you move my dish somewhere less obvious?

Usually yes, provided the new position keeps a clear southern sightline. Rear walls, side returns and chimney mounts are the common alternatives.

What do I lose by moving to Freesat or Freeview?

You keep the main free-to-air channels and lose the paid ones. We'll go through what you actually watch before you decide, rather than pushing you either way.

My recorder only records one channel at a time. Why?

Almost always because only one cable was run to a twin-tuner box. A second run from a quad LNB or multiswitch fixes it.

Can you set up a box I bought myself?

Yes. We'll install it, cable it, tune it and make sure it works with your aerial or dish rather than leaving you with a manual.

Free advice, no obligation

Tell us about the sky & freesat set-up you need.

Speak to an engineer on WhatsApp — Mon–Sat 8am–8pm, Sun 9am–5pm. We cover North & North West London and most jobs are finished in a single visit.

WhatsApp for immediate help