Hampstead Aerials & Satellites

Screens on walls

TV wall mounting with cables hidden

The mount is the easy half. Doing it well means knowing what's behind the plaster in a Victorian house, choosing fixings that suit it, and hiding the cables inside the wall so you're left with a screen and nothing else on show.

  • Brick, stud or lath and plaster
  • Cables inside the wall
  • Chimney breast specialists
Large television mounted on a chimney breast with cables fully concealed

North & North West London

Fixings chosen for the wall you actually have

Period houses around here are rarely straightforward. Behind the plaster you might find soft London stock brick, lath and plaster on timber studs, a hollow chimney breast, or a dry-lined wall with a cavity nobody mentioned. Each needs a different fixing strategy, and a heavy screen on the wrong one is a genuine hazard.

We locate the structure before drilling, avoid pipes and cables, and use fixings rated well above the weight of your television. On stud walls we span the noggins properly; on chimney breasts we check the brickwork condition and keep clear of flue liners.

Then the finish. Power and aerial or satellite outlets go behind the screen, cables are chased in or routed through the void, and the bracket is set level and at the height you'll actually watch from — usually lower than people first suggest.

What the job includes

What a mounting job involves

Wall assessed first

We establish what's behind the plaster and where services run before a single hole is drilled.

Correct bracket

Fixed, tilting or full-motion, matched to your screen's VESA pattern and weight.

Cables concealed

Chased into the wall or routed through the void, with trunking only where a chase isn't possible.

Outlets behind the screen

New aerial, satellite or power points positioned so nothing is visible below the TV.

Height and level

Set for comfortable seated viewing and checked level on the bracket, not by eye.

Soundbars and shelves

Matching brackets and floating shelves for soundbars, consoles and boxes.

How it works

TV wall mounting: from your first message to a finished job

  1. 01

    Send a photo

    The wall, the room and the TV model tell us the bracket and fixings we'll need.

  2. 02

    Check the structure

    On arrival we confirm the wall build-up and agree the exact position and height with you.

  3. 03

    Mount and conceal

    Bracket fitted, screen hung, cables chased or routed, outlets added as needed.

  4. 04

    Tidy and demonstrate

    Dust sheets up, everything vacuumed, picture and sound tested before we leave.

Questions we get asked

TV wall mounting — the details

Can you mount a TV above a working fireplace?

Often, but heat and flue position matter. We check the chimney breast build-up and will advise against it if the screen would sit in rising heat.

Can you hide the cables in a solid wall?

Yes — cables are chased into the plaster and made good, or run through a void where one exists. We agree the approach with you before starting.

What about lath and plaster or stud walls?

Both are fine with the right approach. We find and fix into the timber structure rather than relying on plasterboard anchors for a heavy screen.

Do you add a socket behind the TV?

We fit aerial and satellite outlets behind the screen. For new mains sockets we work with a qualified electrician so the certification is correct.

Will you take the old bracket down?

Yes, and we make the fixing holes good so the wall is ready for touching up.

Free advice, no obligation

Tell us about the tv wall mounting you need.

Speak to an engineer on WhatsApp — Mon–Sat 8am–8pm, Sun 9am–5pm. We cover North & North West London and most jobs are finished in a single visit.

WhatsApp for immediate help